TYGRIS GLOSS WHITE AEROSOL SPRAY PAINT 400ML ACRYLIC RAL9010
TYGRIS GLOSS WHITE AEROSOL SPRAY PAINT 400ML ACRYLIC RAL9010
Acrylic-based gloss white aerosol topcoat in RAL 9010, suitable for professional finishes on most substrates with high opacity and excellent adhesion. Supplied in a 400 ml can with two interchangeable nozzles (direct and fan) for controlled application. Touch-dry and ready for overcoating in 15 minutes and fully dry in 24 hours. Image for illustrative purposes only.
Features
-
Acrylic formulation for greater flexibility
-
Gives excellent adhesion
-
Compatible with most materials
-
Can be applied over previously painted surfaces
-
Wear and scratch resistant
-
High opacity
-
Supplied with two nozzles: direct spray and fan spray
-
Consult the safety data sheet prior to use; suitable personal protective equipment should be worn
-
Surface should be clean, dry, and grease-free; apply primer first for uneven surfaces, complete colour changes, or extra protection
-
Prepare with a light sanding for good adhesion
-
Shake can vigorously for 2 minutes
-
Adjust nozzle for desired spray pattern; apply a number of light coats with a sweeping action from 25–30 cm
-
Paint is touch-dry and ready for overcoating in approximately 15 minutes; fully dry within 24 hours
-
After use, invert can and spray to clear nozzle
-
Coverage: approximately 1.5–2 m² per can
-
Dispose of used aerosols in line with local and national regulations
Specifications
-
Type: Acrylic topcoat aerosol
-
Volume: 400 ml
-
Colour/Code: Gloss White, RAL 9010
-
Appearance: Gloss white
-
Odour: Typical paint aroma (organic solvents)
-
Composition: Blend of pigments, nitro-cellulose binder, solvents, and hydrocarbon propellants
-
Flash point: <0°C
-
VOC content: Approx. 91%
-
Solids content: Approx. 9%
-
Maximum temperature in use: 110°C
-
Storage: Below 50°C