FLYWHEEL PULLER M26x1.50 RH, EXTRACTOR, MX-12928

Flywheel Puller M26 x 1.50mm RH Thread External

Description:

• Compatible with KTM ENDURO / OFFROAD / MX TWO-STROKE 125/250/300/360CC KTM MOTOPLAT.

Cross reference numbers:

• MP12


• WPS 62-2002


• MX-12928

Fits most:

• Husaberg: 4 stroke 400cc, 501cc, and 600cc off-road models.


• Husqvarna: Late 2 stroke models with CDI ignitions.


• KTM: 125cc, 250cc, 300cc, 360cc, 495cc XC and MX 2 stroke.


• ATK Rotax models.


• Classic: Bultaco, Ossa, Montesa, KTM, Husqvarna, Sachs, Puch, Zundap, Cannondale 440 speed models.

Compatible models:

• 1996-1999 Husaberg FC400


• 1994-2000 Husaberg FC501


• 1993-1996 Husaberg FC600


• 1998-2000 Husaberg FC600


• 1996-2000 Husaberg FE400


• 1996-2003 Husaberg FE400E


• 1989-2000 Husaberg FE501


• 1996-2003 Husaberg FE501E


• 1993-1996 Husaberg FE600


• 2000 Husaberg FE600


• 1996-2000 Husaberg FE600E


• 2003 Husaberg FS400E


• 1998-1999 Husaberg FS600E

Tips on use:

• Ensure the flywheel thread is clean of dirt and not damaged before screwing the puller in.


• Use copper grease on the puller threads for long life.


• Make sure the puller is fully screwed into the flywheel.


• After tightening, use a hammer on the center and tap to jolt free (not always needed).


• If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.